Treat your battery like a pet you love. Keep it in moderate temperatures; never leave it in a hot truck or trailer. Feed it when it’s hungry but not all the time. Protect it from things that can harm it. Keep it clean. And don’t overwork it.
“As lithium-ion cells near the end of their life cycle, you may notice your battery might hit its voltage cutoff right before you finish mowing. A couple years after that, you might only mow three-quarters of the job. This capacity decrease over time is natural,” says Jason Wilk, senior product manager for Echo USA.
This is a factor of the battery’s total charge and discharge cycles, Wilk says, not a factor of time. And we’re talking about a lot of cycles.
“We’re in the thousands of cycles, not just the hundreds of cycles,” said Zafir Farooque, director of product management for Milwaukee Tool. “There’s been a lot of advancement in lithium-ion cell technology in the past decade even. We are significantly improving battery life.”
Still, batteries fade and eventually perish, so LM spoke with Wilk and Farooque to learn how you can extend battery life and then dispose of them properly upon their passing.
Cool it
“I like the pet analogy,” Farooque says. “And if you brought your pet to a jobsite or a construction site, you’d find a lot of hazards to manage for your pet in that environment.”
Heat is the No. 1 enemy, he says. “Heat kills everything, from batteries to electronics to motors. The less heat you can generate, the more runtime you’ll get. And the longer life you’ll get from a battery.”
The heat generation in a battery will vary from one piece of equipment to the next. “Hedge clippers are like the poster children for battery equipment,” Echo’s Wilk says. “They don’t take a lot of power. It’s not a high demand for a battery pack, so the temperature stays cooler.
“But a leaf blower is the opposite. It pulls a tremendous amount of power; the battery can discharge its power quickly and can build heat more quickly.” So battery life will vary depending on your mix of equipment use.
With increased charge and discharge cycles, a battery that just runs in a leaf blower would have a shorter effective life than a hedge trimmer battery. While they’re designed to work in that heat, you can help protect them by avoiding heat during storage, like hot enclosed trailers.
For charging, most modern batteries and chargers communicate with each other. If the battery is over a certain temperature when you place it on a charger, that charger will wait until the temp comes down. They can also cool a battery to safe levels before completing the charge cycle for use in the tool. It’s about airflow over the battery’s cells.
Users need to stay aware of possible overheating conditions in a battery. And many batteries will communicate that condition. For Echo, that’s a steady red light on the battery’s display. For Milwaukee, “it’s four lights blinking simultaneously to let you know, ‘hey, you pushed it a little too hard,’” says Farooque.
Handle with care
“These batteries include some pretty sophisticated electronics,” Wilk says. They can take some abuse, but they do have sensitive circuitry inside. “Keep the terminals clean and check them for corrosion,” he adds. “Don’t toss them into your truck bed. For storage, protect the terminals from contact with items that could cause a short.”
Farooque says it’s wise to do visual inspections regularly. “Look for cracks in a battery housing. Check for dirt on the terminals or possible water ingress. We expect our users to use battery equipment in the same manner as their gas tools and hand tools. Those things get abused a lot, and so our testing is designed to withstand that. But it’s good to check.”
At the end, the rainbow bridge for your batteries is recycling. Echo, Milwaukee and pretty much every major manufacturer pays a fee upfront so you can recycle their batteries for free at thousands of approved drop-off sites across the country, from Lowe’s to your local small engine repair shop. Check BatteryNetwork.org/locator to find the one closest to you.
